Who is online? | In total there are 36 users online :: 0 Registered, 0 Hidden and 36 Guests None Most users ever online was 207 on Tue Jun 11, 2013 11:13 pm |
Top posting users this week | |
| | Dynatek cdi | |
| | Author | Message |
---|
Wht07rhino
Posts : 104 Join date : 2013-10-15 Age : 38 Location : Celina,OH
| Subject: Dynatek cdi Wed Nov 27, 2013 8:55 pm | |
| Well just picked up a used Dynatek Cdi for the 660 form a guy in Oregon for $70 heard these were one of the best for the rhino ...guess we shall find out when it arrives if not well trade it off for MSD Charge.....what's your guys opinion on the Dynatek non programmable by the way? | |
| | | CamoRhino660
Posts : 253 Join date : 2013-03-10 Age : 45 Location : Hayesville,Ohio
| Subject: Re: Dynatek cdi Wed Nov 27, 2013 10:04 pm | |
| It's a good CdI if you have a stock motor or run a lower compression piston. They have to much timing in them for buit high compression motors. | |
| | | Crusty
Posts : 431 Join date : 2013-08-10 Age : 54 Location : Woods Cross Utah
| Subject: Re: Dynatek cdi Thu Nov 28, 2013 2:24 am | |
| I have a Dynatek in my 660 and just had a 720 Stroker built, guess I'll see how it does I also have an MSD Charge for a back up but I'm hopefully going to get a programmable one if I can ever recover from this build. Word of advice don't try to build 2 Rhino's at the same time, you will go broke lol | |
| | | Wht07rhino
Posts : 104 Join date : 2013-10-15 Age : 38 Location : Celina,OH
| Subject: Re: Dynatek cdi Thu Nov 28, 2013 12:37 pm | |
| Hahaha crusty wish I had the money to build one rhino let alone two simultaneously | |
| | | moobster
Posts : 88 Join date : 2013-10-02 Age : 62 Location : Southern Ontario
| Subject: Re: Dynatek cdi Tue Dec 03, 2013 7:28 pm | |
| Dynatek CDI works good on my 660 Rhino, also have one on my 660 Grizzly, never had any problems. Both stock motors, jetted and exhaust on both. | |
| | | Sponsored content
| Subject: Re: Dynatek cdi | |
| |
| | | | Dynatek cdi | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |