RhinoGiant cage? anybody have one

I just picked up a new RhinoGiant cage extension that mounts to the frame for $275
Does anyone have one?
What are your thoughts on them?
THANX!!

I have one an I think its great you got a great deal on it I just payed almost 700 for mine new from them I like that it bolts to the frame an not the bed an comes with the rear bumper only thing that sucks is that u have to take it off to do anything under the bed but I can have mine off in 5 minutes so not too bad

Cool thanks Kyle, 
I also purchased a complete RZR4 cage for $20.00 and was thinking about using the connector pieces that bolt there cages together and welding them to my main cage and the extension so I only have to remove the 4 allen head bolts up top and the 2 bolts at the bumper to remove it.
It seems to be a pretty sturdy cage and I also just found a rear seat with mount for $150.00 that I'm going to try and get this week.

I think its very sturdy. my extension came in 7 pieces 2 bars that bolt to factory cage than the 2 90s an bumper an brackets I just remove the allen bolts the connect the the 90s to the 2 bars that go to the factory cage an remove the bumper an the bed will dump only takes a couple mins to take off. the seat I used in my rhino is out of a ford expedition its the 3rd row jump seat an it fits perfect an its removable all I have to do is pull 2 pins an it out.

My current cage is a complete custom built cage and is all welded together so I don't have the option of un-bolting the top bar to install the extension, the rear of my cage comes down into the rear of my bed and has the tire mount so I have to cut up the extension and do a little fab work.  
I really hate having to hack up my cage but I do want to 4 seat it, I would like to see how you did your expedition seat, I never picked up the other seat yet

ill take a few pics of it this week an post them. the seat comes with brackets that bolt into the ford I just bolted them into my bed an the seat pins into them seat belts are built onto the seat. works pretty good an fits perfect in the rhino

Cool thank you very much.

these are the seat mounts i have a piece of round stock to space an bolt the rear part of the mount to the bed. have to take them off to get the seat out with the cage on
 

with seat installed
 

Sweet, so those are the actual mounts that were on the seat?
Can you fit an adult back there with that seat?
I just hacked off the rear section of my cage today and now waiting for my fab guy to build me a new bracket for the bumper, it only came with 1. 
Thanks for taking a pic for me.

no problem.yes those mounts go with the seat an 2 adults could fit back there i think theres more than enough room i put a small cooler in the middle with the 2 kids

Nice, I think I might be going that route then. 
Thanks again.

no problem glad to help out. id like to see yours when its all done

I would like to see it too lol it was very hard to cut off that rear section, I really liked my cage. 
My mounting bracket won't be done until next week so hopefully I will have the rest all prepped and ready to install it when it's done.

OK so I found this cool seat it's a 2nd row seat from a 2005 Dodge Caravan and is 41.5" wide
the back rests drop down into child seats with harnesses so I can take adults or the Grandkids.
Will post pics of the install when I start it.

Nice!! Id like to see it in the rhino kids will love that seat

Well it didn't leave much foot space but so far it's turned out pretty good. 
Got it installed and had to lose the base and do my own because it sat too high for my liking. 
Will post pics soon I'm taking pics as I go and hopefully by Wednesday it will be done. 
I jacked up the Rhino to adjust the shocks and with the wheels off the ground I noticed my wheel bearings are starting to wear out so now I have bearings to change. 
At least I noticed before I had a full load of people in it. 
Still waiting on one mounting bracket before I can even start on the cage and I just found out we are going to Moab for the weekend with the SXS's going to be a busy week to get this done by then lol

sounds like your running into the same thing i did when i jacked mine up to tighten the shocks i noticed my wheel bearings an knuckle bushing were getting bad so i had to change them while i was there

Well this is it so far.
The first pic with my full 2 seater cage.

 




more to come

looking good i do like the looks of that 2 seat cage but it will be nice to fit more people in the rhino. i like the super dutys in the drive way too im a ford guy:D