| | oil change |  |
|
+4soarkrebel KJrhino Pokahpolice txgrown1404 8 posters |
| Author | Message |
|---|
txgrown1404
Posts : 193
Join date : 2013-03-22
Age : 45
Location : wichita falls, Tx
|  Subject: oil change  Sat May 04, 2013 5:46 pm | |
| how much oil do you put back in after changing oil and filter?????? 2.11 qt. or 2.96 qt | |
|
| | |
Pokahpolice
Posts : 283
Join date : 2013-03-10
Age : 44
Location : Maine
| | Subject: Re: oil change Sat May 04, 2013 7:35 pm | |
| Depends on how you change the oil. If you just pull the plug and filter it should be 2.2 qt. If you drain the oil cooler it will be just under 3 qt. | |
|
| | |
txgrown1404
Posts : 193
Join date : 2013-03-22
Age : 45
Location : wichita falls, Tx
| | Subject: Re: oil change Sat May 04, 2013 7:46 pm | |
| - Pokahpolice wrote:
- Depends on how you change the oil. If you just pull the plug and filter it should be 2.2 qt. If you drain the oil cooler it will be just under 3 qt.
how do you drain the oil cooler | |
|
| | |
KJrhino
Posts : 268
Join date : 2013-03-11
Age : 37
Location : springfield,OR
| | Subject: Re: oil change Sun May 05, 2013 12:38 am | |
| HMM when i did mine it was 3 qts with filter but i had the wet clutch out just before I serviced it.
Yamalube 10-40 and OE filter is what I used JBS recommended | |
|
| | |
txgrown1404
Posts : 193
Join date : 2013-03-22
Age : 45
Location : wichita falls, Tx
| | Subject: Re: oil change Sun May 05, 2013 11:08 am | |
| yeah i got a yamaha oil change kit it came with 3 qts filter and a few gaskets and a metal lock ring which i guess it was for the oil plug. but im still not sure how much to put in i put in 2 1/2 qts for know gonna go ride this afternnon and see what it does and chrck it then | |
|
| | |
soarkrebel
Posts : 36
Join date : 2013-03-11
Location : Arkansas
| | Subject: Re: oil change Sun May 05, 2013 11:39 am | |
| Just a little over two quarts ...run it ....kill it....check it again in a few minutes and add accordingly. | |
|
| | |
rhino727
Posts : 1317
Join date : 2013-03-25
Age : 59
Location : musella,Ga.
| | Subject: Re: oil change Mon May 06, 2013 5:25 pm | |
| I put 2 + an check then add till its full on stick | |
|
| | |
madmax 1
Posts : 1743
Join date : 2013-03-10
Age : 58
Location : frostburg md
| | Subject: Re: oil change Mon May 06, 2013 6:44 pm | |
| amsoil 4 stroke and add till full on the stick , start and then recheck | |
|
| | |
Pokahpolice
Posts : 283
Join date : 2013-03-10
Age : 44
Location : Maine
| | Subject: Re: oil change Mon May 06, 2013 7:28 pm | |
| - txgrown1404 wrote:
- Pokahpolice wrote:
- Depends on how you change the oil. If you just pull the plug and filter it should be 2.2 qt. If you drain the oil cooler it will be just under 3 qt.
how do you drain the oil cooler Remove the oil cooler. I'm sure you could blow it out somehow but I remove mine and clean it when I change the oil. | |
|
| | |
| The author of this message was banned from the forum - See the message |
Polarblu
Posts : 30
Join date : 2013-05-18
| | Subject: Re: oil change Sat May 18, 2013 8:24 pm | |
| Synthetic oil has a long life just change the filter. The oil is designed to go 3 service intervals in any other machine. Just sayin...... | |
|
| | |
123.bert0621
Posts : 1464
Join date : 2013-03-18
Age : 64
Location : Western Quebec
| | Subject: Re: oil change Sat May 18, 2013 10:01 pm | |
| Oil and filter change every year,10w-40 Yamalube synthetic,if you want to clean the cooler,remove it, run brake cleaner and air through it. | |
|
| | |
Sponsored content
| | Subject: Re: oil change | |
| |
|
| | |
| | oil change | |
|
Home 
