| Project "Resurrected Rhino" | |
|
+14madmax 1 WV Hot Rod Rhino Wht07rhino Bayou Tiger scottwv rhinoroger Crusty rhino727 Hump 08Rhino450SE T.Rhino 123.bert0621 flimmy Baxter Built Fabrications 18 posters |
|
Author | Message |
---|
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| Subject: Project "Resurrected Rhino" Wed Oct 30, 2013 10:53 pm | |
| This will be a long and drawn out project but I thought I post some pics before I start cuttin it up.This is my personal Rhino.it's an 08 with LS MTS 27.5 Pittbulls and Hiper beadlocks.As stated before it getting boat sided which means I'm taking the rocker tube up 6" from the frame out.Bed delete and crab cut of the bed sides.6" drop in the seats and Fuel cell relocation with some carbon fiber work at the end.Oh I set the factory cage back on it for a good before and afterwards pic.My next job won't be here till Fri so I'll start on it in the morning.The next pic is of it sitting in front of a stock rhino on worn out 27" Mud Lights. | |
|
| |
flimmy
Posts : 988 Join date : 2013-03-10 Age : 56 Location : Mt. Pleasant , Pa
| Subject: Re: Project "Resurrected Rhino" Wed Oct 30, 2013 11:09 pm | |
| I cant wait to see the pic's. I already have the rear dovetailed. I want to boat side it and drop the seats then chop the cage I built | |
|
| |
123.bert0621
Posts : 1464 Join date : 2013-03-18 Age : 64 Location : Western Quebec
| Subject: Re: Project "Resurrected Rhino" Wed Oct 30, 2013 11:33 pm | |
| That's going to be cool to see how your ideas come out, and we can see your finished project. | |
|
| |
T.Rhino
Posts : 1469 Join date : 2013-03-10 Age : 50 Location : Wayne county kenova WV
| Subject: Re: Project "Resurrected Rhino" Thu Oct 31, 2013 6:33 am | |
| This is going to be some cool shit !!! | |
|
| |
08Rhino450SE
Posts : 789 Join date : 2013-03-10 Age : 70 Location : oHio
| Subject: Re: Project "Resurrected Rhino" Thu Oct 31, 2013 10:36 am | |
| HELL yeah | |
|
| |
Hump
Posts : 679 Join date : 2013-03-10 Age : 45 Location : Richwood, WV
| Subject: Re: Project "Resurrected Rhino" Thu Oct 31, 2013 11:32 am | |
| Sounds like it's going to be a real nice rhino. Should look cool as hell. | |
|
| |
rhino727
Posts : 1317 Join date : 2013-03-25 Age : 59 Location : musella,Ga.
| Subject: Re: Project "Resurrected Rhino" Thu Oct 31, 2013 2:18 pm | |
| can't wait to see how it turns out | |
|
| |
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| |
| |
rhino727
Posts : 1317 Join date : 2013-03-25 Age : 59 Location : musella,Ga.
| Subject: Re: Project "Resurrected Rhino" Sat Nov 02, 2013 9:56 am | |
| defiantly go be a low rider for your seats , this will lower center of gravity some what | |
|
| |
T.Rhino
Posts : 1469 Join date : 2013-03-10 Age : 50 Location : Wayne county kenova WV
| Subject: Re: Project "Resurrected Rhino" Sat Nov 02, 2013 12:58 pm | |
| Looks awsome. Great work. | |
|
| |
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| |
| |
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| Subject: Re: Project "Resurrected Rhino" Sun Nov 03, 2013 1:41 am | |
| Please excuse the mess in the shop.This spring I'm moving into a bigger building and it will look a little more professional.I can go back to this being my personal shop/garage.lol | |
|
| |
Crusty
Posts : 431 Join date : 2013-08-10 Age : 54 Location : Woods Cross Utah
| Subject: Re: Project "Resurrected Rhino" Sun Nov 03, 2013 2:02 am | |
| That thing is going to look sick as hell! | |
|
| |
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| Subject: Re: Project "Resurrected Rhino" Sun Nov 03, 2013 3:37 am | |
| Thanks Crusty that's what I'm after.i hope to make it a good advertising piece.Wait till I get the paint, powder coat and vinyl on it.A buddy of mine says I'm nuts for wasting the time on the factory bed sides.He don't like what I have in mind but I think they have to stay. | |
|
| |
rhinoroger
Posts : 218 Join date : 2013-03-10 Age : 64 Location : Bridgeport, WV.
| Subject: Re: Project "Resurrected Rhino" Sun Nov 03, 2013 10:34 am | |
| | |
|
| |
scottwv
Posts : 601 Join date : 2013-03-10 Age : 52 Location : Charleston , WV
| Subject: Re: Project "Resurrected Rhino" Sun Nov 03, 2013 11:38 am | |
| - Baxter Built Fabrications wrote:
- Please excuse the mess in the shop.This spring I'm moving into a bigger building and it will look a little more professional.I can go back to this being my personal shop/garage.lol
That thing is gonna be bad-ass !! Hell...don't worry about the mess...everyone I know with a garage (including mine) looks like that ...except for James . His is always organized. | |
|
| |
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| Subject: Re: Project "Resurrected Rhino" Mon Nov 04, 2013 1:36 pm | |
| Pic of the reinforced lower back A arm mount.Should last a little longer than the factory one did which surprising took a hell of a shot to do what it did.I'd say the spindle giving way absorbed most of it. | |
|
| |
Bayou Tiger
Posts : 341 Join date : 2013-03-14 Age : 58 Location : Central Florida
| Subject: Re: Project "Resurrected Rhino" Mon Nov 04, 2013 2:25 pm | |
| Can't wait to see the final product....gonna be BADD ASS!!! | |
|
| |
123.bert0621
Posts : 1464 Join date : 2013-03-18 Age : 64 Location : Western Quebec
| Subject: Re: Project "Resurrected Rhino" Wed Nov 06, 2013 11:19 pm | |
| Beautiful welds, that brace is nice. Starting to see your vision for the seats and rockers, sweet! | |
|
| |
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| Subject: Re: Project "Resurrected Rhino" Thu Nov 07, 2013 2:38 am | |
| Start bending the top of the cage tomorrow, if it will work.My 4 seat cages have 6 bends and go from one A pillar around the back and to the other A pillar.This one I'm doing on my Rhino now will have 10 bends in it and go from A to A.I've never done that many.Cross your fingures I think I can do it as long as I have help doing it.There will be a lot of lube and leverage hanging off the end of that bender.lol | |
|
| |
Crusty
Posts : 431 Join date : 2013-08-10 Age : 54 Location : Woods Cross Utah
| Subject: Re: Project "Resurrected Rhino" Thu Nov 07, 2013 2:41 am | |
| 10 bends on one piece of tubing? Damn I'm lucky if I can unwind a coat hanger lol | |
|
| |
Baxter Built Fabrications
Posts : 136 Join date : 2013-03-14 Age : 45 Location : Rockford OH
| Subject: Re: Project "Resurrected Rhino" Thu Nov 07, 2013 2:59 am | |
| Look at the 660 4 seater cage I did Crusty.That is 20' of tubing around the top with 6 bends.I've done 6 bends a bunch but the shape of this with 10 bends is scary.If I attempt it myself you guys will get a kick out of it if I post pics.lol Straps from the rafters,cherry picker. ,gets interesting sometimes. | |
|
| |
Crusty
Posts : 431 Join date : 2013-08-10 Age : 54 Location : Woods Cross Utah
| Subject: Re: Project "Resurrected Rhino" Thu Nov 07, 2013 9:19 am | |
| I seen those cages, I wanted you to build me one but the shipping would have killed me. Damn fine cages! | |
|
| |
Wht07rhino
Posts : 104 Join date : 2013-10-15 Age : 38 Location : Celina,OH
| Subject: Re: Project "Resurrected Rhino" Thu Nov 07, 2013 5:03 pm | |
| Holy cow Baxter you weren't kidding on changing it up....I'll have to atop by some time and check it out in person... and discuss a cage for mine in the future | |
|
| |
WV Hot Rod Rhino Admin
Posts : 2682 Join date : 2013-03-10 Age : 57 Location : Mt. Hope, WV
| Subject: Re: Project "Resurrected Rhino" Thu Nov 07, 2013 5:09 pm | |
| | |
|
| |
Sponsored content
| Subject: Re: Project "Resurrected Rhino" | |
| |
|
| |
| Project "Resurrected Rhino" | |
|