RZR seats installed - Pics

Yes they do. I have Simpson 5pts.

Got some switches in and wired up today and the lc1 in and wired also. Hopefully tomorrow will get the bung in and hopefully get the doors I have had for 2years mounted up tomorrow also! I'm so ready to ride this fing thing it's not even funny !

Scott  removing the cross bar have you notice any thing as far as cage wanting to move any with out it.
 I like the seats an hoping that removing bar might give a little more room, I will start looking for a set around Ga. for sale

Jeff, I'm 6' at 190lb and left the bar and used the stock bases and have more than enough room. I've got a guy that is 6' 3''
that works for me that I could have stop by for a test fit, if that would help.I think with the lowered bases you could slide them 
all the way back to the bed and leave the bar in... just a thought.

thanks Joel , yea if its no big deal get him to try out the fit , I like that idea of keeping bar

I took out my cross bars and I think it will be just fine cause I put my harness bar in. Don't see it being any less sturdy.

Hey Jeff a set of all black ones out of a 13 just went up for sale for $40 each on rzr forum. Should only be around 50 or less to ship. That's a good deal!!

Will any of the RZR model seats fit our Humble Rhinos? Or only certain models?

I think the front seats are the all the same, look the same.

X2

Any will work. They are basically all the same.

Been looking for better seats for the bike but haven't wanted to dump $500-600 into a new butt pad. $40 a throw is pretty cheap, can't buy used OEM seats for that. Like what Brew did with the base, nice!

thanks camorhino will check that out

Jeff,I hope this helps.. Sam is 6'3'' and ya can  see the legroom he has on the stock bases.

Gotta respect a man with a Busch heavy in his hand!!

The seats look right at home, and you look pretty comfy to  Sam, thanks Joel.

thanks Joel that looks like it will work for me , tell Sam thanks to  and the seats look great in your ride

The seats look great, enjoy, oh you are!!!!  Removing the bar hasn't seems to effect anything although I know if will weaken it a lot.  At some point I want some sort of side to side support.  I might try to put the bar back in after grinding the headrests off.  I think the seats should fit right under with the lowered bases.

got my seats today thanks JP , hope to have in this week , could not stand it put together an sat them in place the blue/black seats looks good just sitting in Rhino  they match up to my blue rhino nice   

rhino727 wrote:

got my seats today thanks JP , hope to have in this week , could not stand it put together an sat them in place the blue/black seats looks good just sitting in Rhino  they match up to my blue rhino nice   

JJ, how was my homemade packing job? I did my best, hope they were ok...post some pics, thanks for the 18 pack of Bud Light!

I got my seats on Sat...forgot to tell ya JP.  I got one mounted up and ran out of time to get the other base plate made.  Ill get some pictures once i get it all done up.  Everything made it just fine with no issues.  THANKS A TON!!!

chuddly wrote:

I got my seats on Sat...forgot to tell ya JP.  I got one mounted up and ran out of time to get the other base plate made.  Ill get some pictures once i get it all done up.  Everything made it just fine with no issues.  THANKS A TON!!!

Thats great news Chad, I was worried they might get jacked up in the mail..now lets see some pics!...what did u think of my homemade box?

JP , I had to pick up at the office, the guy  working there was in shock at your box was like ( I would not except that ) I thought u did great, saving $$$ on box very creative . seats were fine . an please pop another top an enjoy the 18's now I have to get aluminum plate for base when I get done will  post a pic, will be first for me  

rhino727 wrote:

JP , I had to pick up at the office, the guy  working there was in shock at your box was like ( I would not except that ) I thought u did great, saving $$$ on box very creative . seats were fine . an please pop another top an enjoy the 18's now I have to get aluminum plate for base when I get done will  post a pic, will be first for me  

JJ, tell dipshit, Fedex out here shipped it and approved it, I'd call fedex and complain that u had to use your gas and time to do their job, maybe u can get some cash back. glad they showed up in good condition, wasn't that box classic, I should have taken a pic. can't wait to see em mounted... 

easy JP  pop another cold one  , they (fed-ex) tried to deliver an missed me was easier for me just to pick up  when I left work Monday an again thanks