New Guy from AZ

Posts : 6 Join date : 2013-12-03

Hey ya'll, just became the proud owner of 2007 Rhino 660. So far I know the Rhino has a K&N intake, DMC exhaust, Jet Kit (unsure what jets have been installed), Dynatek CDI, and full roll cage. This Saturday I'm going to peel through her and replace the air filter with a Uni, do an oil change, replace the fuel filter, clean out the carb (been running like crap, won't idle believe to be clogged jets) and change the spark plug. Anything else I should be looking at replacing, fixing, or cleaning on the ol' gal? Also I keep hearing things about an airbox mod, but not sure what it is. Pretty new to the Rhinos and don't know a whole lot about them. Thanks in advance!

Posts : 1638 Join date : 2013-03-10 Age : 51 Location : CA

Welcome from the wild west, get ya a JBS sheave with new OD weights and new secondary spring and you'll have a new ride!

Subject: Re: New Guy from AZ Tue Dec 03, 2013 5:49 am

welcome to the site an x2 on the jbs sheave kit its like a whole new rhino with it Very Happy

Subject: Re: New Guy from AZ Tue Dec 03, 2013 7:57 am

welcome to the site....post up some pictures of your rig so we can all get a look at it. I agree with the above guys as well !

Subject: Re: New Guy from AZ Tue Dec 03, 2013 9:11 am

Welcome to JBS land lol A JBS sheave is the best mod you can do.

Subject: Re: New Guy from AZ Tue Dec 03, 2013 9:32 am

CHECK ALL THE THINGS YOU WOULD CHECK IF YOU WERE BUYING A USED 4X4 PICK UP AND WHEN THAT'S ALL GOOD,START WITH THE MOST REWARDING MOD THE JBS PRIMARY AND SECONDARY KIT AND INSTALL NEW ULTRUMATIC GREASE. DON'T GO DRY AND ENJOY YOUR RIDE.WELCOME HERE.

Subject: Re: New Guy from AZ Tue Dec 03, 2013 10:18 am

Howdy & welcome to the James Gang. Look up '04 Style' for carb mod, real easy mod and cost is zero. With the DMC exhaust you'll see improvement with more air into the carb.

Posts : 6 Join date : 2013-12-03

Thanks everyone! I actually plan to get a JBS sheave once Christmas has past. I'll get some pictures up later today once I stop by the house.

Subject: Re: New Guy from AZ Tue Dec 03, 2013 12:26 pm

Welcome from WV

Subject: Re: New Guy from AZ Tue Dec 03, 2013 9:58 pm

Welcome from Maine

Subject: Re: New Guy from AZ Tue Dec 03, 2013 10:03 pm

Great, got to like pictures.

Subject: Re: New Guy from AZ Tue Dec 03, 2013 10:06 pm

The tracks look cool Nate.

Subject: Re: New Guy from AZ Tue Dec 03, 2013 10:28 pm

Howdy.

Subject: Re: New Guy from AZ Tue Dec 03, 2013 10:46 pm

Welcome.

Subject: Re: New Guy from AZ Tue Dec 03, 2013 11:03 pm

welcome, careful when u start with a little mod ..........then BAM the mod bug will bite an buy buy savings account Crying or Very sad

but dang its fun

Posts : 6 Join date : 2013-12-03

Ha, the mod bug got me awhile back when I bought my Silverado. The unfortunate part was that I started running out of things to do on it, thus enter the Rhino. But I'm trying keep myself at bay... Except for the part of where I just bought a Mikuni 45mm carb for it today. God, it has started!! affraid

Subject: Re: New Guy from AZ Wed Dec 04, 2013 6:57 am

AZ Rider wrote:: Ha, the mod bug got me awhile back when I bought my Silverado. The unfortunate part was that I started running out of things to do on it, thus enter the Rhino. But I'm trying keep myself at bay... Except for the part of where I just bought a Mikuni 45mm carb for it today. God, it has started!!

I tried to keep myself content with my rhino as well but after the jbs sheave k&n intake exhaust I couldn't stop. now my rhino is apart getting a 720 stroker kit the mod bug bite me hard lol!

Posts : 6 Join date : 2013-12-03

Haha! I'm sure my wife is going to regret letting buy the thing!!