new 660 sheave!!!!

Subject: new 660 sheave!!!! Sun Mar 24, 2013 11:30 pm

downloading vid now ...will post in the morning!!!

Posts : 1337 Join date : 2013-03-10 Location : Arkansas

Oh Yea ! Still finding stuff for a 660 !!!

HOTROD STYLE

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 1:14 am

Oh yeah! It's on now! What is Hunterworks Todd going to do now? LOL

Posts : 38 Join date : 2013-03-10

Hunterworks though is this 5 years ago and they are all pre sold. but it's the same as James.

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 8:24 am

24 more minutes and it will be downloaded!!!!!!

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 9:10 am

https://youtu.be/PnYR3D1WYU4

Posts : 66 Join date : 2013-03-10

Whats the 700 cam plate do compared to 660?

Posts : 1337 Join date : 2013-03-10 Location : Arkansas

Wow !!!! More low end...............for FREE

Don't know how You found it, But thanks again !

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 9:59 am

they have a better made camplate and if their 660 one is wore bad they can add the 700 one...this is what most have done for years im just perfecting it a little bit..lol

Posts : 66 Join date : 2013-03-10

I'm sure mine needs it. Got 1200 mud miles. Sometimes it like lunges forward when im just cruising. Can bearly tell but its there.

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 10:15 am

you should service it good so it doesnt wear other things..post pics and i will look and make sure it good for ya

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 10:50 am

I love the stickers you got on your table.. lol

Posts : 66 Join date : 2013-03-10

WV Hot Rod Rhino wrote:: you should service it good so it doesnt wear other things..post pics and i will look and make sure it good for ya

Thanks.
I just bought a trailer to pull it around with so it'll be a while. Too many hobbies for a gov job. Sad

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 11:42 am

cool james, whats the 700 camlpate cost might want to upgrade right away, if you havn't shipped

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 11:44 am

27.00

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 11:56 am

cool i'll take one you already have my info, have you tested in a bike yet, just wondering how much more low end, thanks mick

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 11:58 am

no more than the 660 one...you only need it if yours is wore

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 12:02 pm

mie only has 450 miles i guess i shouldnt need one

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 12:06 pm

i thout you ment it would give more low end with the new sheeve my mistake

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 12:16 pm

all these years 660 owners have lost some bottom end when they used a 700 camplate on machined sheaves..just fixed it

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 12:26 pm

gotcha man,i'm alittle slow

Posts : 17 Join date : 2013-03-10 Age : 54 Location : NC

LOL, love the decal placements!

Posts : 1337 Join date : 2013-03-10 Location : Arkansas

This will allow anyone running a 700 plate to use 100% of their sheave. I changed to the 700 plate at the same time I got my JBS sheave. I have so much more low end with the JBS sheave over stock, so I never thought to see if there was more room for belt travel. Can't image even more low end. I think even a very small amount of more belt travel will be very noticeable on take off. I've got about 200 more miles before a sheave service, so I will wait to do it then. I service my sheaves every 500 miles (which is way too soon), but I really enjoy studying how it is working with different stuff(weights,grease,ect..)

Besides that,it seems like James keeps coming up with new stuff faster than I can get one done !

Posts : 1337 Join date : 2013-03-10 Location : Arkansas

DesignMine wrote:: LOL, love the decal placements!

Do You have the HOTRODRHINOFORUMS.COM decals for sale yet. I want one !

Subject: Re: new 660 sheave!!!! Mon Mar 25, 2013 1:02 pm

daryl...make me 100 hotrodrhinoforums.com...she is sending a order

» New Sheave
» sheave
» sheave
» Hot Rod Sheave can only do so much
» Anybody run a UTV inc Sheave?